Photovoltaic power plant fence mesh is widely used in photovoltaic power plant as a protective barrier wall.
Photovoltaic power station fence mesh generally need customers to provide drawings or specifications, our company can also be customized according to the specific use and environment of the product. For example, in the island windy high salt environment need to use hot-dipped galvanized by phosphating treatment and then plastic coated surface treatment to achieve the longest service life of the product.
The structure of photovoltaic power plant fence mesh is mainly divided into: mesh, Pillar pipe, Pile pipe, connectors, post caps, etc., according to the actual situation or there may be added or subtracted.
Attention is needed in the construction process of installing guardrail:
1. When cargoes are placed on the construction site, avoid placing them directly on the ground and in order to avoid breakage of the cargoes, they should be placed on anvils.
2. Foundation pouring and foundation block installation should be carried out in accordance with the prescribed practice, the correct position of horizontal, vertical and centering. The upper end of the foundation should be 3cm above the ground as a standard, and should not be extremely high above the ground or buried in the ground.
3. When processing parts at the construction site, be sure to repair and maintain cutting surfaces and protruding parts.
4. After assembly, tighten the nuts. If there are scratches or flakes on the paint surface, use touch-up paint to repair them.
